Prevent damage to your hardwood floors
There are some tips on how to prevent damage to your solid hardwood floors:
Stay away from having dirt, grit and sand on your hardwood floors. These elements are detrimental to your hardwood floors. They act like abrasive material on the finish, causing scratches, dents and dulling. Place floor mats at entrances to trap dirt and prevent damage.
Stay away from water and other spills. Standing water can warp defectively finished hardwood floor and can ruin the finish. Merely rub lightly with a cloth with the cloth all spills as they happen.
Intense Cleaning solutions. Avoid oil soaps. They can cause a accretion and create the problems when your floor is expected to have a maintenance coating . Utilize the suggested neutral pH cleaners made specifically for wood floors.
Furniture. Avoid having your furniture drawn with force along the hard wood floors . Make sure to lift up the furniture to move it. Use a thick folded blanket under the furniture legs; it will help to stop scratches.
Dents. In order to prevent tears use the vacuum with a brush attachment. Avoid the use of vacuums with beater bars.
Sun exposure . Direct sun can discolor your hardwood floor. Keep you window treatments and shades closed. Or add special sun block shades to protect from the sun intense UV rays.
General care for your hardwood floors:
Sweeping. Use the dusters with fine, bursting tips to trap all the dust and grit effectively.
Vacuuming. Use the specially invented canister vacuums with special bare floor attachments. They are the most appropriate way eliminate all the dirt and dust.
Dusting Mop. Use a sufficient dust mop. The dust mop should have 12 to 18 inch cotton head and a special dust mop treatment. Aerosol the treatment onto the mop head 12 to 24 hours before dust mopping.
There are several kinds of hardwood flooring
Oak and maple are the most popular hardwoods used in flooring.
Ash, beech, birch, cherry, hickory and walnut are more luxurious hardwoods that are used for floors and decorative accents.
There are some tips and suggestions to inspect the condition of your hardwood floors
Finish Condition. Check closely if the finish been deteriorated or is it just dirty. See if the finish is having very little depth of color, chipped, scraped or gouged. In order to examine if the finish is obsolete, start in a high-traffic area and pour one to two tablespoons of water onto the floor. If the water soaks in immediately and leaves a darkened spot, the finish is worn and water can destroy the wood. If the water soaks in after a few minutes and darkens the wood only slightly, the finish is halfway worn. If the water droblets on top, the surface is properly sealed. Repeat this test in low- and medium-traffic areas.
Wood Condition. Check to see if the finish is worn, the wood may have been busted. Examine the areas for stains, burns, cuts, gouges, holes, cracks or deflected boards. If the wood is busted repair or replacement may be required.
Leave a Reply